Showing posts with label alvin905. Show all posts
Showing posts with label alvin905. Show all posts

Tuesday, November 9, 2010

Alvin's Blog Post Novemeber 9, 2010

Hello Fellow Classmates,

Today in class we were all assigned questions from the textbook. I was assigned question 19 on pg 79.

19. A square picture with an area of 100cm is mounted on a square piece of matting. The matting has 2.5 times the area of the picture. If the picture is centered on the matting what width of the matting is visible around the outside of the picture ? Give your answer to the nearest tenth of a centimeter.

First of all if the matting is 2.5 times the size of the picture, then the picture would be 250 cm ( 2.5 x 100 ). Then the picture is placed in the center of the matting so then we take away the area of the picture from the matting, so its ( 250 - 100 = 150). So now the area of the matting is 150cm, so now we have to find the width of the matting. First the sides of the pictures are 10cm because the area of the picture is 100 ( 10x10 = 100). The lengths of the sides of the matting is 12.2 since 150 squared is 12.24744871 ( I just rounded it ). So now since there is 2 sides on the picture since its placed in the middle the width of one side would be 1.1cm because (12.2 - 10 divided by 2) since there is two widths.

I tried my best to explain this and I'm sorry if you don't understand ):
(it's plain since my colour wont work

Wednesday, November 3, 2010

Alvin's Blog Post

Today in math we were each assigned a question from the textbook. My question was in section 2.2, on page 60 question #13.

The question was :
A submarine was cruising at a depth of 153m. It then rose at 4.5m/min for 15 minutes.

a) What was the submarine's depth at the end of the rise ?

Since the submarine was rising 4.5m/min for 15 minutes, all you need to do is multiply the meters by the minutes. Because since 1 minute is 4.5m then if it were 15 minutes you multiply the minutes by 15, and what you do to one side you have to do the same to the other. So 4.5/1 x 15/1 = 67.5, the submarines depth at the end of the rise would be 85.5 since then you have to subtract that distance from the total distance ( 153 - 67.5 = 85.5).

b) If the submarine continues to rise at the same rate, how much longer will it take to reach the surface ?

Since the submarine is already at 85.5m you have to find the amount of time it will take the submarine to surface. So you divide the distance by the amount of time it takes to rise, so then its 87.5 divide 4.5 = 19. You do that because if 4.5m is a minute, and you want to find how many minutes it takes to rise 85.5 you divide those numbers. So then the submarine will take 19 more minutes to reach the surface.

Thanks for reading my blog, I couldn't put color in for some reason.

Tuesday, October 5, 2010

Alvin's POOOST October 5, 2010

Hi people.

Today in math class each student was assigned t
o do a blog. Each blog is based on answering a question in the textbook, or on this paper he gave us !.

My question was on that sheet !.

The question is :The surface area of a metal tube must be coated with lubricant. The exterior diameter of the tube is 14 cm, the thickness of the tube wall is 4 cm, and the length of the tube is 50 cm. Determine the total surface area that must be coated, to the nearest tenth of a square centimeter.

The tube looked a little like :
MY ANSWER IS :

First of I found out the total surface area of the cylinder

SA= 2pieR2 + 2pieRH
SA= 2 x 3.14 x 72 + 2 x 3.14 x 7 x 50
SA= 307.72 +2198
SA= 2505.72 cm
2

Then i found out the area of the empty circle

SA= 2pieR2
SA= 2 x 3.14 x 32
SA= 56.52 cm2

Then finally I took away
the area of the empty circles from the total surface area

2505.72
- 56.52
2449.20

The total surface area that would need to be coated would be 2449.20 cm2

THANKS FOR REAAADING !





Tuesday, September 21, 2010

September 21, 2010

HI CLASSMATES !

Today in math classed we learned about different ways we can rotate a figure on the coordinate grid !.

We learned 3 different methods that can help us rotate a figure on a coordinate grid.
Method # 1
The first method is we can grab any object with a right angle( e.g a piece of paper ). Then we line it up any letter that is part of the figure you're rotating. You can now rotate it how ever you want counter clock wise or clock wise.
Looks something like this :
Method # 2
The second method is rotating the object by first picking a letter part of your firgure like A. Then from the center of rotation count horizontal toward the firgure, then count vertical to the figure, then rotate that mini kind of object the way you need to. This is the way i use because its pretty easy.
Looks something like this : Method # 3
This is for if you really dont get it and you need to use a figure and a string. First you trace your figure on another paper then cut it out. You then attach a string to get then rotate it.
Looks something like this:


SORRY IF ITS HARD TO UNDERSTAND I TRYED MY BEST !

homework was Extend 24 and 25 (hard), Workbook 1.2, Extra Practice 1.2 if you missed it.

INTERGER TEST TOMMOROW. !!!!

JERICK YOUR NEXT .