Showing posts with label prisms. Show all posts
Showing posts with label prisms. Show all posts

Thursday, October 7, 2010

Argie's blog post.

Okay, well today in class we were all assigned questions to make a blog about. My question was question number 19 from chapter 1.3 in our math textbooks.

The question was:
A party planner buys two plain cakes for a meal she is planning. One cake is square and the other is round. Both cakes are 6 cm think. The square cake measures 25 cm along each edge. The round cake has a diameter of 25 cm.
A) Sketch and label a diagram of each cake
B) Show how to make four cuts to create eight equal pieces for each cake.
C) Estimate and then calculate how much the surface area increases after each cake is cut and the pieces are slightly separated.

A)






B)






C) First you have to find the surface area of the whole rectangular prism.
SA = 2(lxw)+2(lxh)+2(wxh)
= 2(25x25)+2(25x6)+2(25x6)
= 2(625)+2(150)+2(150)
= 1250+300+300
= 1850 squared cm

Now you have to cut the rectangular prism into 8 equal pieces. So you divide the 25 by 8 because you are cutting it into 8 pieces.
25/8=3.125

Now find the surface area of one of those pieces.
SA = 2(lxw)+2(lxh)+2(wxh)
= 2(25x3.125)+2(25x6)+2(3.125x6)
= 2(78.125)+2(150)+2(18.75)
= 156.25+300+37.5
= 493.75 squared cm

After that has been done you have to multiply that answer by 8 because there are 8 pieces.
493.75x8=3950 squared cm

The surface area of the rectangular prism with the 8 equal pieces cut would be 3950 squared cm.

Since we just finished the rectangular prism, now the cylinder.

To find the surface area of this particular cylinder you do this...
First you need to get the radius from the diameter
r = d/2
r = 25/2
r = 12.5 cm

Now to find the surface area
SA = 2 x pi x r2 + 2 x pi x r x h
= 2 x 3.14 x 12.5 2 + 2 x 3.14 x 12.5 x 6
= 98.125 + 471
= 569.125 squared cm

Now that you have the surface area you now have to cut it into 8 pieces. So you divide the diameter by 8 to get 3.125

Now to get the surface area of the 8 slices

SA = 2 x pi x r2 + 2 x pi x r x h
= 2 x 3.14 x 3.125 2+ 2 x 3.14 x 3.125 x 6
= 61.33 +

my blog post

okay class, we were all assigned questions, and i got question 7 from section 1.3 in our textbooks.



For the first part of question 7 it asks for the dimensions of the cut out piece. If you look at the image above the cut out piece is in the corner.

So to find the dimensions you could see that they are:
9cm, 15cm, and 17cm.

Then for part two, it asks how the cut out piece will affect the surface area for the original rectangular solid. But truth is it doesn't.

It shows the top, side, and front view of the solid, but it shows a whole surface! So the surface area stays the same because cutting out a CORNER piece will only affect the volume. But if you look at the piece at front, side, and top view. The shape looks perfectly normal!

What we learned:
The dimensions of the cut out piece is 9cm, 15cm, and 17cm

Sometimes cutting out a corner on a prism will not affect the surface area

Elaine's Scribepost for October 5, 2010

Hi you guys! We each were assigned a question to do for the blog and the question I got was the one with the picture of the house.

The question was :

The surface area of walls, roofs, doors, and windows all affect the amount of heat loss from a house. Calculate the surface area for the doors,windows, walls, and roof for the house below. Express each answer to the nearest tenth of a square metre.

wi
ndo
ws = 80cm x 60cm each
doors = 205cm x 82
cm each
-back of the house is identical to the front
-sides of the house are identical to each other














I started off with the windows. Since there are 3 window in the front and 2 window on the side, and the opposite sides are equal there would be 10 windows all together [(3+2)(2)]

Here is how I got the area of the windows:

First, I converted the centimetres into metres by dividing it by 100
80/100= 0.8m
60/100= 0.6m

SA = 10(lw)
= 10(0.8 x 0.6)
= 10 (0.48)
= 4.8 squared m



Now, I will calculate the area of the doors. Since, the back and front of the house are both identical, there would be 2 doors :

I also had to convert the cm in m:

SA = 2 (lw)
= 2 (2.05 x 0.82)
= 2 ( 1.68)
= 3.36 squared m



For me, finding the area of the walls got a little tricky. What I did was find the sides of the walls, then subtracted the area of the doors and windows:


SA = 2 (lw) = 2 (lw)
= 2 ( 4.8 x 2.5) + (2.5 x 7)
= 2 (12) + 2 (17.5)
= 24 + 35
= 59 squared m

- after adding everything, together, I had to subtract the area taken up by the windows and doors.
-the area of the doors was 3.36 squared m
- but for the windows, only 8 are on the walls so I had to find the surface area of 8 windows:
SA = 8 (0.8 x 0.6)
= 8 (0.48)
= 3.84 squared m

SA = 59 - 3.36 - 3.84
= 51.8 squared m



Lastly, I have to find the area of the roof I did that using two different steps, the rectangles, then the triangles:


SA = 2(lw)
= 2 (7 x 4)
= 2 (28)
= 56 squared m

now I find the area of the triangles:
-SA =2 (b x h/ 2)
- but since the formula is multiplied and divided by two, they both cancel out
-SA = b x h

SA = b x h
= 4.8 x 3.2
= 15.36 squared m

now I add the two:

SA = 56 + 15.36
= 71.36 squared m

-but after adding the two, I have to subtract the area of the two windows
-SA= 2 (0.8 x 0.6)
= 2 (0.48)
= 0.96


SA = 71.36 - 0.96
= 70.04 squared m

After all the work that's done, the answers are:

Windows = 4.8 squared metres
Doors = 3.36 squared metres
Walls = 51.8 squared metres
Roof = 70.04 squared metres




That is how I got all my answers. Sorry if it's kind of confusing and THANKS FOR READING MY SCRIBE

Tuesday, October 5, 2010

Hannah's scribepost for Oct 5

October 5, 2010
Hi guys

So I was assigned to do question 5 a) of the textbook. Here it goes.

By the way, I might have done it a little differently. But as Backe had said, we're all going to Polo Park. It doesn't matter how we get there, as long as we all end up there. So,




As you can see, I've labeled the faces of this prism. A number for each face. (face 1, face 2, etc) Btw, sorry for the awful quality. Pretty much all I did was I calculated the surface area of each face, and then added them together at the end to find the total surface area. If this confuses you, there is an example and explanation of how this method works in page 28 of our textbook.

Now I made a chart to show the calculation for each faces. I hope you are able to follow. Feel free to ask me if it's really that confusing.





In case you didn't get the measurements, the distance between dots is 2 cm, not 1. When I checked at the back of the textbook for the answers, I found that the answer stated there is 216 cm² which is exactly half of the answer that I got. I think it may be that they've forgotten that each distance from dot to dot is 2 cm instead of 1. Or maybe I did something wrong, so tell me. That's all.

April's scribepost for October 5

HI EVERYONE!
Today in math class, we were each given a question to blog from the textbook. I will be showing you how I got the answer for #14.




#14: A chimney has the dimension shown. What is the outside surface area of the chimney? Give your answer to the hundreth of a square meter.





Well, it took me about 3 hours to figure this out, so I really hope it's right and could help you guys! :)

Thankyou for taking the time to look at my post. If you have any questions, I would be happy to answer them or help you out! Oh, and please don't forget to comment!

Jeric's Scribepost for October 5

Hi guys. Today in math class we were given questions from the textbook that we had to do. We were also supposed to do a scribepost for the specifically given question.



So my formula for this rectangular prism is:
SA = 2 ( lw ) + 2 ( lh ) + 2 ( wh )
SA = 2 ( 8x12 ) + 2 ( 8x5 ) + 2 ( 5x12 )
SA = 2 ( 96 ) + 2 ( 40 ) + 2 ( 60 )
SA = 192 + 80 + 60
SA = 332 cm2

My assumptions in finding my answer would still be 332cm2 because assuming the metal casing is 0 thickness.

I know this is simple but I am pretty sure I got some things wrong so please comment and RATE ? THNX GUYS !!!

Binesi's Blog Post

Today in class I was assigned question 9 to do for the blog.

Examine the bookshelf. It is constructed of thin hardwood. The top, bottom, and all three shelves are the same size. There is an equal distance between the top, the shelves, and the base.

a) What is the surface area of one shelf?
A= l x w (2)
A= 90 x 24 (2)
A= 4 320 cm

You have to multiply by two because theres both a top and bottom in the smaller inside shelf.

b) What is the total surface area of the bookcase?
For the tops and undersides of the entire bookshelf you have to go Length x Width x 10

I got the 10 because there are 5 identical surfaces (add both sides of them equals 10)

The sides of shelves (There are 2 but you have to do both sides)
120 x 24 x 4 = 11 520cm

The very back of the shelf (Multiplied by 2 both sides)
90 x 120 x 2 = 21 600

You add all of the pieces together :
TSA= 21 600+11 520+21 600
TSA= 54 720cm


c) What is the fewest number of surfaces for which you need to find the surface area in order to answer part b?

Only 3 (the back, the small inner shelf and the side shelf)








Brendan's Blog Post

In this Blog Post, I will be going over Question 3 on page 8 in your homework book.
The Question is "Which container has the greater surface area?" and "How much more surface area does one have than the other?". It also told me to round to the nearest tenth.
The first container looks like this.




I found the surface area of this cylinder by making it's net, and then finding the surface area of the circle and rectangle.
The net of this cylinder looks like this ..





S.A of the circle = Pi x r squared
= Pi x 5 squared
= Pi x 25
= 78.5 squared cm
Before I could find the surface area of the rectangle in the net, I needed the formula for the diameter of the the circle which was ..
d of the circle = r x 2
= 5 x 2
= 10 cm
and the circumfrence of the circle for the other side of the rectangle.
C of the circle = Pi x d
= Pi x 10
=31.4 cm
Now that I found out the circumfrence of the circle, I can figure out the surface area of the rectangle in the net.
S.A of the rectangle = l x w
= 14 x 31.4
= 44 squared cm
So the TSA (total surface area) of the cylinder is ..
TSA = [2(S.A of cirlce)] + (Area of rectangle)
= [2(78.5)] + (44)
= 157 + 44
= 201 squared cm
The second container looked like this.













I found this shape's surface area by making it's net, and then adding the surface area for all three different sides, and the multiplied the answer by two.

This is what the net looks like ..

T.S.A of rectangular prism = 2(14 x 5) + (5 x 8) + (14 x 8)
= 2(70) + (40) + (112)
= 2 (222)
= 444 squared cm
I know the second container's surface area is more than the first container's surface area by 241 squared cm because 444 - 201 = 243 squared cm.
Thank you for reading my blog post.
Do not be afraid to help me learn by correcting me!

Allysa's Scribepost for October 5, 2010

Hey guys!

Today in math, we were assigned to do one question in our textbooks. Mr.Backe picked for us and I got one of the hard ones. It may not be hard for others, but this one made me struggle a bit. I tried different ways to get the right answer, and I finally got it. Here's my way:

12. a) What is the difference in height between the left-hand and right-hand sides of the garage? Explain why you would want a slight slant to a roof?
The difference is 0.06m. The reason there's a slant in the roof is if it rains, the rain would run off the slant. If it was straight, the water would just stay in the middle of the roof and would cause leaks.

b) Given that the house is attached to the left side of the garage, what is the surface area of the garage to the nearest hundredth of a square metre? What assumption(s) did you make in answering this question?
I combined a couple of the measurements so that it would be one length, width, or height.
CHANGED MEASUREMENTS:
- 3m + 0.25m + 0.25m = 3.5m
- 2.15 + 0.25 = 2.4m

Surface Area = SIDE + FRONT/BACK + TOP Surface Area = (7 x 2.37) + 2(3.5 x 2.4) + (7 x 3.5)
Surface Area = (16.59) + 2(8.4) + (24.5)
Surface Area = (16.59) + (16.8) + (24.5)
Surface Area =
57.89(squared centimetres)

The assumptions I made to make sure this was right was, not to add the the bottom and right side of the figure.










Thanks for reading my blog!
Don't forget to comment(;

Jennifer's Blog Post! October 5th 2010


HELLO CLASSMATES ! =)

Today in math class, I was assigned to do this question four in the math workbook since there was only like 23 questions in the math text book. This one to me seems a bit of a challenge since I wasn't sure if I was right or not. So please do comment if I had made any mistakes.




For those people who doesn't know what TSA means, it just a short was to say total surface area. What I have done for the two part from the given question is I basically did a formula like. Instead of adding the total areas of each face, I just do one side of the face and multiply by two since it's the same on the other side am I right? That's how I got my answer! Oh and question B, its the same thing but the height is different so it would be a whole different surface area.

THANKS FOR READING! COMMENT AS WELL ! =)

Brianna's Blog

Question 4 part b.

Each object has been constructed from centimetre cubes. Estimate and then calculate the surface area.




This is the front view of the shape.















The side view.









And the top view.











The estimated surface area of the shape is 4x4x6.



To find the surface area, you must find the length and width of each face. For example, there are 4 faces that are 4 by 6 and 2 sides are 2 by 4 and if you add them all together then you will get the surface area.




4(6x4)+2(2x4)
4(24)+2(8)

96+16
112cm2




Please leave comments because i may be wrong =)














Tuesday, September 28, 2010

EMMANUELS BLOG POST?!

In today's math class, we worked on calculating the area of prisms and cylinders. We also worked a bit on finding the volume of a prism.

To calculate the area of faces on a cylinder, you must use the formulas:
πr² (pi x radius squared) AND 2πrh (2 x pi x radius x height)

For finding the area of the top face of a cylinder you must use the formula:
πr²




For example:
The radius of the cylinder is 5cm

π r ²(pi x radius squared)

(3.14) (5²) I got 3.14 from pi, and 5 because that is the radius.

(3.14) (25) After squaring 5, you are left with 25.

After multiplying 3.14 and 25, the top face of a cylinder would be:
78.5cm²

You also need to know the formula for finding the area of the rectangle in a cylinder. The formula for that is:
2πrh (2 x pi x radius x height)

For example:
A cylinder has a radius of 4, and a height of 3.

2 π r h (2 x pi x radius x height)

2x(3.14) (4) (3) 3.14 represents pi, 4 is the radius, and 3 was the height

(6.28) (4) (3) I got 6.28 after multiplying 3.14 by 2

(25.12) (3) 25.12 was from multiplying 6.28 by 4

75.36cm² is the area of the rectangular face on a cylinder

For finding the surface area of a prism, you will need the following formula:
2(lxw)+ 2(lxh)+ 2(hxw)
(You add the two because there are 3 pairs of opposite sides with the same area)



For example:
A prism has a length of 5, a height of 2, and a width of 3, what is the surface area?

To start off, you would need the formula:
2(lxw)+ 2(lxh)+ 2(hxw)

Then replace the variables with their numbers:
2(5x3)+ 2(5x2)+ 2(2x3)

One at a time you multiply the brackets:
2(15)+ 2(10)+ 2(6)

Once you've done that, you multiply the lengths by 2:
30+20+12

Then you find your answer!
62cm²

Now that were done.. just kidding we have to learn volume now.

To find the volume of a prism, you must use the formula:
WxDxH (width x depth x height)
(though they might not always give you the exact numbers)

For example:
A prism has a width of 2, a depth of 2, and a height of 2.

Start of with your fancy formula:
WxDxH

Fill in the numbers:
2x2x2

MULTIPLY:
8cm³(volume is always cubed)

Thank you for reading my scribe post which took 5 hours.

WANT MORE PRACTICE? VISIT THESE SITES www.shodor.org/interactive/activities/surfaceareaandvolume www.mathguide.com/lessons/SurfaceArea.html

PLAY MORE TUTPUP CHILDREN

I choose JERIC for the next scribe.. just kidding it's actually
ARGIE